Posts: 8
Threads: 2
Joined: Sep 2004
Hi
I would like help with getting online with ntl boardband. I have just brought ep 1&2 for the gamecube with a broadband apadter.
My connection is set up using my cable from my pc straight to my gamecube becasue my pc is next to it.
First i started the game up and set up my network setting witch i did right i think, but to make sure could you write what is the right setting for ntl.
So after that it came up with a menu to buy hunters liensce or go back to game menu, so i clicked on phachase hunters lesinese but the it just loads forever and never goes to any website or nothing.
Dont know what to do?
Any help good thanks!
Posts: 1,493
Threads: 46
Joined: May 2003
Hmmm not to sure really. Are you using ICS or have you just directly connected it to your cable modem/set top box?
![[Image: Zer0_Signature.jpg]](http://www.ragol.co.uk/uploads/Zer0_Signature.jpg)
Character Stats
Ziophioc - Level 106 FOmar
Proj3ctZer0 - Level 11 HUmar
Posts: 8
Threads: 2
Joined: Sep 2004
It is connected striaght from my ntl box to my gamecube, using a Rj45 cable.
Posts: 1,493
Threads: 46
Joined: May 2003
Try setting it up through ICS, and connect it to your network card. You will need to your ethernet crossover for this setup. If you only have direct cable, go to your local computer store and ask them if they have some lil device thingy thats transfers direct signals to crossover.
Character Stats
Ziophioc - Level 106 FOmar
Proj3ctZer0 - Level 11 HUmar
Posts: 24
Threads: 4
Joined: Jun 2004
can you tell me the exact set for isc for the gc bba my friend has tried it but he had no luck he said with his router it was automatic connect and set up but he could not get it to work with the isc
Posts: 1,493
Threads: 46
Joined: May 2003
You need to set up all the server details on ICS correctly to enable the connection to be shared. But if you looking for the most effiecent and easier way to get round it, without setting up all that ICS crap, a router is your best choice. You should be able to set up an internet connection sharing in your Connections panel in Accesories.
Character Stats
Ziophioc - Level 106 FOmar
Proj3ctZer0 - Level 11 HUmar
Posts: 8
Threads: 2
Joined: Sep 2004
Ok its getting wierd now.
Now i log online and get a message saying.
(1o1) Failed to connect to the server. Line will be disconnected.
Does anyone know whats the right setting for ntl broadband and the right way to connect using ntl.
Thanks!!!!!!
Posts: 8
Threads: 2
Joined: Sep 2004
I have looked on a few other help sites and some people have said that it works better using a router? its this good in this sitution?
Thanks again!
Posts: 1,493
Threads: 46
Joined: May 2003
Yeh because it directly splits the connection, without having to set up ICS, You havent got a firewall or anything enabled have you?
Character Stats
Ziophioc - Level 106 FOmar
Proj3ctZer0 - Level 11 HUmar
Posts: 8
Threads: 2
Joined: Sep 2004
IM ONLINE!!! thanks for help!
