04-04-2005, 04:15 PM
On my card it only has a stero input for external sounds (RF/TV comes through the same input). So you'd have to get a L+R audio connection -> stero input. You can get these from Maplins.
Dscaler has support for most cards. You install the drivers from your TV card (and it's software if you want) and Dscaler will just use those drivers.
I would say that most modern cards are ok. The quality on mine is fine (TV and all other inputs).
Isn't s-video format independant? ie doesn't matter if PAL or not? Not sure though...
Basically if you buy the TV card from England it should work fine. My Taiwanese friend bought TV box in Taiwan and it didn't work here because it didn't support the right PAL (there are 3 or 4 different PALs :S).
Buy from England, and get a L+R -> stero plug (few £), and everything should be fine
Dscaler has support for most cards. You install the drivers from your TV card (and it's software if you want) and Dscaler will just use those drivers.
I would say that most modern cards are ok. The quality on mine is fine (TV and all other inputs).
Isn't s-video format independant? ie doesn't matter if PAL or not? Not sure though...
Basically if you buy the TV card from England it should work fine. My Taiwanese friend bought TV box in Taiwan and it didn't work here because it didn't support the right PAL (there are 3 or 4 different PALs :S).
Buy from England, and get a L+R -> stero plug (few £), and everything should be fine